Question ID: 2000-11170-0-3-8-9
Recipe Description
1. A soldering iron. I used a 25 watt iron. It heats up quick and cools down just as fast and only costs about $102. Solder3. Two (2) 10 penny nails.4. 3' of lamp cord5. A lamp plug. A self effecting plug works well and does not require any additional user input6. Hot Dog rolls - they do not have to come from Market Basket. Stop and Shop brand works just as well7. Hot Dogs. I like Ball Park Franks. "They Plump When You Cook 'em"That's all you need to start enjoying a delicious electric hot dog.Before you continue. Please be advised, this project comes with an ELECTROCUTION HAZARD
You can use your teeth to strip this size wire. I would suggest however you grab a kitchen knife and strip a solid 1/2" of insulation from the cable.!!! WARNING !!!Please take care when using a knife. Good practice would also suggest you twist the exposed conductor in a clock wise motion.
When finished soldering this is what it should look like.
Next solder a small drop of solder to the underside of the nail head as shown
Twist the exposed wire around the recently soldered nail as depicted in the picture. Standard practice suggests twisting in a clock wide motion.
Follow the manufacturers instructions for connecting the lamp plug to the lamp cord.
This is what it should look like after the lamp plug and the nails have been connected to the lamp cord!!! WARNING !!!Before continuing consider what you have just created.You now have two metal nails connected to a lamp cord that can be plugged in to an electrical outlet.!!! YOU CAN BE ELECTROCUTED !!!
!!! WARNING !!!This is where we have to take a moment to consider where we are. If you have considered the fact that you now have two metal nails soldered to a lamp cord on one end and a plug on the other that can be plugged into an electrical outlet, and you have considered the fact that when you plug this device in you will have two exposed conductors capable of electrocuting you, after you have considered the fact that this has the potential to kill you, then you are ready to proceed.!!! WARNING !!!Before you plug this device in push the nails into each side of the hot dog and place the hot dog in the bun.
!!! WARNING !!!!!! ELECTROCUTION HAZARD !!!With the hot dog secure in the bun and the two nails pushed into the hot dog, plug in the lamp cord
!!! WARNING !!!!!! WARNING !!!!!! WARNING !!!BEFORE touching the nails unplug the lamp cord from the wall.If you have survived this far you deserve a well cooked hot dog.This device will cook a hot dog to completion in about 20 secondsAdd your favorite condiment and enjoy a delicious "Ball Park Frank with the added knowledge that you survived to eat again.
Question & Answer
Question: Choose the best image for the missing blank to correctly complete the recipe.
Choices:
 |
 |
 |
 |
|---|---|---|---|
| (A) | (B) | (C) | (D) |
|
|---|
 |